Update FAN.md

```

## Example (using ESPHome):

ESPHome API section:

ESPHome configuration example:

```yaml

esphome:

  name: my_espir

  platform: ESP8266

  board: esp01_1m

api:

  services:

    - service: send_raw_command

      then:

        - remote_transmitter.transmit_raw:

            code: !lambda 'return command;'

remote_transmitter:

  pin: GPIO14

  carrier_duty_percent: 50%

```

configuration.yaml:

HA configuration.yaml:

```yaml

smartir:

fan:

climate:

  - platform: smartir

    name: Bedroom fan

    unique_id: bedroom_fan

    name: Office AC

    unique_id: office_ac

    device_code: 8000

    controller_data: <esphome_name>_send_raw_command

    power_sensor: binary_sensor.fan_power

    controller_data: my_espir_send_raw_command

    temperature_sensor: sensor.temperature

    humidity_sensor: sensor.humidity

    power_sensor: binary_sensor.ac_power

```

## Available codes for Fan devices:

The following are the code files created by the amazing people in the community. Before you start creating your own code file, try if one of them works for your device. **Please open an issue if your device is working and not included in the supported models.**

Your contribution with your own code files is welcome. However, we do not accept incomplete files as well as files related to MQTT controllers.

Contributing to your own code files is welcome. However, we do not accept incomplete files as well as files related to MQTT controllers.

#### Kaze

| Code | Supported Models | Controller |